Hello
The Sup1 will support two 100Mbps connections, either fibre or UTP/MII from
memory depending on supervisor model.
I'm pretty sure that the Sup1 supports ISL trunking, but find out how much
memory the Sup1 has - if it is 8MB, you are limited in the versions of CatOS
you can run to about 2.3, if you have 20MB I think you can go through to
version 4.5. The more recent the version, the more features.
CCxP level switching material seems to focus on a Cat5K for most of the L2
switching features, so it's not to bad if the price is right.
Ross
Munoz, Michael wrote:
>
> Hello:
>
> I am looking to purchase a Catalyst switch for my department to
> play with.
> I have found the deal from Optsys with Cat5k Sup1 and WS-X5010
> Blade but am
> wondering about the capabilities of the switch.. Apparently
> the WS-X5010 is
> 24pt 10MBS as mentioned to me by Brad.. Assuming that I have a
> router with
> FastEthernet capabilities to run ISL, would the switch be able
> to handle
> this since the blade is not able to run 100mbs?
> I just want to make a good purchase for our lab.. At this
> time, we do not
> have any catalyst equipment.
>
> Thanks all for your help!
>
> Mike Munoz
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12849&t=12836
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
