OK, so do you know the actual serial interface that I should order assuming
that they will provide the CSU/DSU? Is there a WIC-E1? I can't find it.
Thanks, by the way, you guys are a huge help...
""Winchester, Derek"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Correct. All you need is a serial interface. If you ask for a T1 or a E1
> they will always offer you a Pri or multiflex. Serial is the only
interface
> you should ask for when using a T1 or E1
>
> Derek S. Winchester
>
>
> -----Original Message-----
> From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 18, 2001 4:22 PM
> To: [EMAIL PROTECTED]
> Subject: RE: E1 interface [7:12864]
>
>
> My experience is that in Europe the Telco provides the CSU/DSU. They
should
> hand off to you as V.35 so all you need is a serial port. Verify this.
>
> > -----Original Message-----
> > From: Matt [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, July 18, 2001 2:54 PM
> > To: [EMAIL PROTECTED]
> > Subject: E1 interface [7:12864]
> >
> >
> > Hey, I know that this sounds dumb, but I've never had to
> > install, configure,
> > or support an E1 interface. So today I went to put together
> > a sales order
> > for someone installing a router in Europe, and the only E1
> > interfaces I can
> > find are PRI and multiflex (?) for doing voice and data.
> > Obviously I need
> > to get more info from the provider over there, but I'm
> > wondering what I'm
> > missing. With a T1 interface, you just have to decide
> > whether or not it
> > gets an internal CSU/DSU or not and then order a WIC-T1 or a
> > WIC-1DSU-T1.
> > Help!
> > Report misconduct
> > and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12883&t=12864
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
