A plain old WIC-1T. It can run up to E-1 speed.

> -----Original Message-----
> From: Matt [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, July 18, 2001 4:59 PM
> To: [EMAIL PROTECTED]
> Subject: Re: E1 interface [7:12864]
> 
> 
> OK, so do you know the actual serial interface that I should 
> order assuming
> that they will provide the CSU/DSU?  Is there a WIC-E1?  I 
> can't find it.
> Thanks, by the way, you guys are a huge help...
> 
> 
> ""Winchester, Derek""  wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Correct. All you need is a serial interface. If you ask for 
> a T1 or a E1
> > they will always offer you a Pri or multiflex. Serial is the only
> interface
> > you should ask for when using a T1 or E1
> >
> > Derek S. Winchester
> >
> >
> > -----Original Message-----
> > From: Daniel Cotts [mailto:[EMAIL PROTECTED]]
> > Sent: Wednesday, July 18, 2001 4:22 PM
> > To: [EMAIL PROTECTED]
> > Subject: RE: E1 interface [7:12864]
> >
> >
> > My experience is that in Europe the Telco provides the CSU/DSU. They
> should
> > hand off to you as V.35 so all you need is a serial port. 
> Verify this.
> >
> > > -----Original Message-----
> > > From: Matt [mailto:[EMAIL PROTECTED]]
> > > Sent: Wednesday, July 18, 2001 2:54 PM
> > > To: [EMAIL PROTECTED]
> > > Subject: E1 interface [7:12864]
> > >
> > >
> > > Hey, I know that this sounds dumb, but I've never had to
> > > install, configure,
> > > or support an E1 interface.  So today I went to put together
> > > a sales order
> > > for someone installing a router in Europe, and the only E1
> > > interfaces I can
> > > find are PRI and multiflex (?) for doing voice and data.
> > > Obviously I need
> > > to get more info from the provider over there, but I'm
> > > wondering what I'm
> > > missing.  With a T1 interface, you just have to decide
> > > whether or not it
> > > gets an internal CSU/DSU or not and then order a WIC-T1 or a
> > > WIC-1DSU-T1.
> > > Help!
> > > Report misconduct
> > > and Nondisclosure violations to [EMAIL PROTECTED]
> Report misconduct 
> and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=12900&t=12864
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to