try this.
modemcap edit usrmodem misc &FS0=1&C1&D3&H1&R2&B1
then under the line config
modem autoconfigure type usrmodem
speed 38400
Make sure dips 3 and 8 are down and the rest up.
hth
Ben
--- "Mr. Richard L. Pickard"
wrote:
> I have a US Robotics Sportster 14,000 modem
> connected to my 2611 router via
> the AUX port.
> The router does not answer the call. I have an
> enable & enable secret
> password set.
> I am certain of the satin crossover cable and all
> other physical layer
> issues.
>
> Here is my config:
>
> line con 0
> transport input none
> line aux 0
> password cisco
> login
> modem InOut
> transport input all
> speed 115200
> flowcontrol hardware
> line vty 0 1
> password cisco
> login
> line vty 2 4
> login
>
>
> Anybody have any ideas?
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15485&t=15417
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
