Paulo, there are several slots for memory on the 7200 series routers, and if
they are not exactly correct in their placement they will give you problems.
You should go to Cisco's website and look up the process for the memory
installation in a 7200, I have had similar issues before and resolved it by
changing the slots that the memory was in to adhere to the Cisco outline.
This may not be the issue, but it is a good place to start.

-----Original Message-----
From: Paulo Roque [mailto:[EMAIL PROTECTED]]
Sent: Monday, August 13, 2001 5:29 PM
To: [EMAIL PROTECTED]
Subject: 7200 and Memory [7:15928]


Hi All,

I have here a Cisco 7204VXR with voice capability, which is having memory
problems.

I have 64Mbytes off memory e the "show memory" reports:
-------------
    #show version
    Cisco Internetwork Operating System Software
    IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(3a)T3,  RELEASE
SOFTWARE (fc1)
    . . . . .
    ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
DEVELOPMENT SOFTWARE
    BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY
DEPLOYMENT RELEASE SOFTWARE (fc1)
    . . . . .
    System image file is "slot0:c7200-is-mz.121-3a.T3"

   **** cisco 7204VXR (NPE300) processor (revision D) with 40960K/24576K
bytes of memory.
    Processor board ID 20405135
    R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3
Cache
    4 slot VXR midplane, Version 2.0
------------

As you can see there are 40960K for system memory.
But the command "show process memory" reports:

--------
    #show process memory
    Total: 13976896, Used: 13688808, Free: 288088
    PID TTY  Allocated      Freed    Holding    Getbufs    Retbufs Process
       0   0      93804       1808    9857992          0          0 *Init*
       . . . . . .
--------

As you can see there are ONLY 13,976,896 of memory.
Any ideas about this??

Thanks in advance.

-------------------------------------------------------------------------
Eng. Paulo Roque
Network Engineer
Cisco Certified Network Associate
[EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=15936&t=15928
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to