The 24MB of memory have been set aside for IO Buffers. While 40MB has been
left for System Memory.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com
----- Original Message -----
From: "Paulo Roque"
To:
Sent: Monday, August 13, 2001 5:29 PM
Subject: 7200 and Memory [7:15928]
> Hi All,
>
> I have here a Cisco 7204VXR with voice capability, which is having memory
> problems.
>
> I have 64Mbytes off memory e the "show memory" reports:
> -------------
> #show version
> Cisco Internetwork Operating System Software
> IOS (tm) 7200 Software (C7200-IS-M), Version 12.1(3a)T3, RELEASE
> SOFTWARE (fc1)
> . . . . .
> ROM: System Bootstrap, Version 12.0(19990210:195103) [12.0XE 105],
> DEVELOPMENT SOFTWARE
> BOOTFLASH: 7200 Software (C7200-BOOT-M), Version 12.0(10)S, EARLY
> DEPLOYMENT RELEASE SOFTWARE (fc1)
> . . . . .
> System image file is "slot0:c7200-is-mz.121-3a.T3"
>
> **** cisco 7204VXR (NPE300) processor (revision D) with 40960K/24576K
> bytes of memory.
> Processor board ID 20405135
> R7000 CPU at 262Mhz, Implementation 39, Rev 2.1, 256KB L2, 2048KB L3
> Cache
> 4 slot VXR midplane, Version 2.0
> ------------
>
> As you can see there are 40960K for system memory.
> But the command "show process memory" reports:
>
> --------
> #show process memory
> Total: 13976896, Used: 13688808, Free: 288088
> PID TTY Allocated Freed Holding Getbufs Retbufs Process
> 0 0 93804 1808 9857992 0 0 *Init*
> . . . . . .
> --------
>
> As you can see there are ONLY 13,976,896 of memory.
> Any ideas about this??
>
> Thanks in advance.
>
> -------------------------------------------------------------------------
> Eng. Paulo Roque
> Network Engineer
> Cisco Certified Network Associate
> [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16103&t=15928
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
