clear xlate
to make your changes in affect
sequence doesnt matter
Best Regards
Have A Good Day!!
*******************************************
Farhan Ahmed*
MCSE+I, MCP Win2k, CCDA, CCNA, CSE
Network Engineer
Mideast Data Systems Abudhabi Uae.
*******************************************
Privileged/Confidential Information may be contained in this message or
Attachments hereto. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions,
Conclusions and other information in this message that do not relate to the
Official business of this company shall be understood as neither given nor
Endorsed by it.
> -----Original Message-----
> From: Munzir Khan [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, August 16, 2001 10:12 AM
> To: [EMAIL PROTECTED]
> Subject: RE: PIX static map question [7:15983]
>
>
> Question for MAJDI & EVANS
>
> just a quick question, Is it really require to restart the
> pix firewall to
> take effect the new settings??
>
> another question is defining static map for
> INSIDE/DMZ/OUTSIDE should be in
> sequence or it does not mater whatever sequence you make.
>
> for example
>
> static (inside,outside) 212.x.x.10 192.168.0.30 netmask
> 255.255.255.255. 0.0
>
> static (inside, DMZ)
> static (inside)
> static (inside,outisde)
>
> see above it is not in sequence i have the same case, I
> applied the settings
> you have suggested but it is not even ping to that IP from
> outside ... also
> tell me Conduit need to be also arranged by the Ip addresses ???
>
> please suggest!!!
[GroupStudy.com removed an attachment of type application/octet-stream which
had a name of Farhan Ahmed.vcf]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16258&t=15983
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
