Hello,
I just received a 2616 router. I set it up through the initial boot
screen:
SubA - 0/0 10.100.1.1 /16
SubB - 0/1 10.200.1.1 /16
Everything works fine if both interfaces are connected, via straight
cable, to a 3Com 10/100 hub. Can ping either interface from either
subnet, all machines on each subnet can ping any machine on other
subnet.
However, when I try to go with two hubs, one for each subnet, I can no
longer communicate. Have assured I'm not on uplink, have tried uplink,
am sure no problems with hub (new out of box, and working in other
configs).
If I have both Subs hooked up to one hub, all link lights are green.
If I move one of the interfaces to the other hub, no link light.
Am I missing something? I'm sure it's something simple but heck if I
know.
Any help greatly appreciated.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=16328&t=16328
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
