No, I am using the same config on all my routers, some of them display it
and some display half. The ones that don't are using 12.0 or less, and the
ones that do are running 12.1 or higher. I heard from someone that there is
an IOS issue with banners in 12.0 or less if you use certain characters or
combinations of characters. Definitely not repeating control characters,
thanks for the response though.
-----Original Message-----
From: Eric Hoffman
To: Lupi, Guy; [EMAIL PROTECTED]
Sent: 8/24/01 9:32 PM
Subject: RE: banner motd [7:17204]
Hi Lupi,
I used to have this problem all the time. It sounds like you are
repeating
the first character of the line, have way through your text.
When the router see's the first character again, it believes that it is
the
end of the line.
An example of the config:
!
banner motd stay out of my routers, you hear!
!
now what would show up upon login is the following:
stay out of my routers
User Access Verification:
Username:
Try using a capital Z at the beginning and at the end of the line, or
some
other rarely used capital letter:
!
banner motd Z stay out of my routers, you hear! Z
!
HTH,
Eric
-----Original Message-----
From: Lupi, Guy [mailto:[EMAIL PROTECTED]]
Sent: Friday, August 24, 2001 8:36 PM
To: [EMAIL PROTECTED]
Subject: banner motd [7:17204]
I am having a problem with some routers, I am trying to put a banner
motd on
them, they take the whole thing in the config. But when you go to
login,
only half the banner shows up. Does anyone know of a way to make this
work?
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17245&t=17204
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
