int s0
backup bri0 or dialer0
alternatively you may use floating static route to set the route through
isdn higher distance than that of primary int.
cheers
yy
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
bob Perez
Sent: Monday, August 27, 2001 10:20 PM
To: [EMAIL PROTECTED]
Subject: ISDN failover [7:17382]
Does anyone know which options you can set in the IOS to provide for
failover to an ISDN line. I have a T-1 setup with Verio and if that line
fails, I would like to go to ISDN for the backup but am unsure how I would
begin to configure this as far as the ISDN commands are concerned. Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17395&t=17382
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
