have you received a reply to this one?
might want to take a look into the backup interface commands:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/dial
ts_c/dtsprt6/dcdbaks.htm#1000937
watch the wrap
If memory serves, there has been some discussion of this function either
here or on the CCIE lab list. something about reliability. this may have
been in conjunction with the OSPF demand circuit function.
Chuck
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
bob Perez
Sent: Monday, August 27, 2001 7:20 AM
To: [EMAIL PROTECTED]
Subject: ISDN failover [7:17382]
Does anyone know which options you can set in the IOS to provide for
failover to an ISDN line. I have a T-1 setup with Verio and if that line
fails, I would like to go to ISDN for the backup but am unsure how I would
begin to configure this as far as the ISDN commands are concerned. Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17480&t=17382
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
