Sam,
The AUI connector does not contain a transceiver...
So for any connection you will need a transceiver. They make them for BNC,
and RJ45. If you are needing an RJ45 connection, just go and buy a
transceiver for that purpose... You can get them at some electronics stores,
or look on ebay. they arent that expensive.
----- Original Message -----
From: sam sneed
To:
Sent: Tuesday, August 28, 2001 12:18 PM
Subject: Connecting 2501 Ethernet. [7:17546]
> I am new to Cisco hardware so this may seem an a dumb question. I found a
> 2501 router at work. The Eth0 int is a DB-15 interface. I looked at
Cisco's
> site and the instrucitons showed how to connect it to a 10base2 network
> only, using a transceiver. What cable/part do I need to connect to a
regular
> Cat 5 network? Our production router is a 4700 with regular ethernet
ports,
> like every other modern router or network device so I am confused by this
> interface.
>
> Also, do they still ship new 2500 series routers with this arcane
> interface?
>
> thanks
>
>
> sam sneed
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17553&t=17546
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
