Oopppsssssssss...
I think I am still failed to deliver my Q :(
My only confusion in this topic is that what Bandwidth we need to consider
,when we do our lab scenerios..Like u consider here 64K...and divide it as
per requirement..
Like for eg..I can see that IN FATKID LabA,they r saying that "As FR link BW
is 64K ",and than diving 64K among different traffic.
On the other hand in another Lab(with normal serial link),they are
considering 32K as orignal BW and than playing with it..
As In usual Lab scenerios,we put 64K on Serial clock rates,Is that our
actual BW..
But When I used Sh interface S0, it shows BW=128K??????????
This is my ACTUAL CONFUSION????WHAT SHOULD BE THE VALUE OF BW TO USE?
Thanks for your help.
Cisco Lover
>From: "Tony Medeiros"
>Reply-To: "Tony Medeiros"
>To: [EMAIL PROTECTED]
>Subject: Re: A Custom Queuing Question [7:17622]
>Date: Wed, 29 Aug 2001 01:52:36 -0400
>
>Assume a 64k link. Custom queueing used "Byte counts" not bits for it
>queue sizes. So divide a 64KiloBIT link by 8 and you get a 8K BYTES per
>second link. Right ??
>
>So here is a quick and dirty queue-list I wrote for a 64KiloBIT link:
>
>queue-list 10 protocol ip 1 tcp www
>queue-list 10 protocol ip 2 tcp ftp
>queue-list 10 default 3
>queue-list 10 queue 1 byte-count 2000
>queue-list 10 queue 2 byte-count 4000
>queue-list 10 queue 3 byte-count 2000
>
>I made 3 queues and divided the 8k of BYTES that I can push through it.
>Queue 1 does 2K bytes, Queue 2 does 4K bytes, and queue 3 does 2K bytes.
>All add up to 8K bytes that we can push through the link.
>
>WWW traffic get 2k bytes or 25% of the link, FTP traffic get 4K bytes or
>50%
>of the link, and anything else (default, the catch all) gets 2K bytes or
>25%
>
>Does this help you understand? It's been a while since I wrote one of
>these
>so I hope I got all the syntax right.
>
>Tony M.
>#6172
>
>----- Original Message -----
>From: "Cisco Lover"
>To:
>Sent: Tuesday, August 28, 2001 9:41 PM
>Subject: A Custom Queuing Question [7:17622]
>
>
> > Hi Friends,
> >
> > Can any one here please explain what should be the"bandwidth Value" if
>we
> > need to divide traffic by percentage ,using Custom queuing.
> >
> > As far as I know(IF Im right )during our lab,as we usually take clock as
> > 64Kbps,then we need to divide this factor (64/8) among the traffic.
> >
> > What about others????I m still confused..
> >
> > Hey!!!!!!!!Can you please solve my confusion.,.....(examples preffered
>:)
> >
> >
> > Thanks.
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at
>http://explorer.msn.com/intl.asp
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=17632&t=17622
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
