Hi,
I am still not sure as to what the 10 address that the default route is
pointing to in the config comes from....I would assume that it would be
the next hop which would be the gateway address that a dhcp client(Win2k
pc) would get if it were in place of the 2600. Is this true? Please help.
I would like to try to config on my 2514. I have waited so long to hear
something like this work. And its wonderful that it actually works!!
Presently, I am using a Win2K Prof. box with 3 NIC cards and getting to
my inside network from work but the performance is not very good. I hope
this new config would help. Any ideas? Thank you very much.
Kind regards.
>From: "Tony Medeiros" >Reply-To: "Tony Medeiros" >To:
[EMAIL PROTECTED] >Subject: Re: Easyip & cable modem [7:19187] >Date:
Sun, 9 Sep 2001 18:13:14 -0400 > >Now you need to setup a fat access-list
or CBAC for some security from all >the idiots on your cable subnet. You
wouldn't believe the probes I get >every day!! This will be a little
challanging for you cus of your dynamic >address. Of course, since your
router will be up all the time, chances are >you will keep renewing the
same IP. Let me know if you need some help on >that. Better do it soon
cus NAT won't protect you much, and you definitely >need protecting. I
run IDS on my router and log all the probes and @!#$ >heads spoffing
internal address and stuff. And believe me, that log gets >pretty large
especially when school is out !! > >Take care >Tony > >----- Original
Message ----- >From: "Bob Lepine" >To: >Sent: Sunday, September 09, 2001
10:39 AM >Subject: Easyip & cable modem [7:19187] > > > > Woohoo. I got
it working. I have my 2600 hooked up to my cable modem of > > which I am
a DHCP client. Thanks to the group for helping me figure this >one > >
out! (Especially Tony Medieros and Leigh Anne Chisholm) I have now hooked
> > the router up to my 2900 switch and have access to the net with all
my > > computer. This will greatly enhance my studies. I am listing the >
> configuration for those who need to do the same. > > Names have been
altered to protect the innocent! > > Current configuration : 997 bytes >
> ! > > version 12.1 > > no service single-slot-reload-enable > > service
timestamps debug uptime > > service timestamps log uptime > > service
password-encryption > > ! > > hostname BobRouter > > ! > > logging
rate-limit console 10 except errors > > enable password 7
045907031F23404B13 > > ! > > ip subnet-zero > > ! > > ! > > no ip finger
> > ip host laptop 192.168.0.3 > > ip name-server 24.229.12.230 > > ip
name-server 204.186.0.201 > > ip name-server 204.186.0.203 > > ! > > ! >
> ! > > ! > > interface Ethernet0/0 > > ip address dhcp > > ip nat
outside > > half-duplex > > ! > > interface Serial0/0 > > no ip address >
> shutdown > > ! > > interface BRI0/0 > > no ip address > > shutdown > >
! > > interface Ethernet0/1 > > ip address 192.168.0.6 255.255.255.0 > >
ip nat inside > > half-duplex > > ! > > ip default-gateway 10.227.49.1 >
> ip nat inside source list 10 interface Ethernet0/0 overload > > ip
classless > > ip route 0.0.0.0 0.0.0.0 10.227.49.1 > > no ip http server
> > ! > > access-list 10 permit 192.168.0.0 0.0.255.255 > > no cdp run >
> ! > > line con 0 > > transport input none > > line aux 0 > > line vty 0
4 > > password 7 05090A0A314E420C03 > > login > > ! > > no scheduler
allocate > > end > > > > -- > > Bob Lepine > > MCSE,MCDBA,CNA,CCNA,MCT >
misconduct and Nondisclosure violations to [EMAIL PROTECTED]
------------------------------------------------------------------------
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19214&t=19187
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
