Yes, the 10 nework is the next hop out of my router. I did a trace to find
what the hops were so that's what I used. I now have my 2900 switch hooked
up to it and it works great!!
Bob
""Chuck Larrieu"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> interestingly, there was a short thread on NANOG about increased instances
> of script kiddie behaviour now that the college kids are back in the
dorms.
> Just tonight there were a couple of posts about a big probe coming into
> someone's network, and originating from three particular blocks in Taiwan.
>
> get your NBAR up and running!!!!!
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Tony Medeiros
> Sent: Sunday, September 09, 2001 3:13 PM
> To: [EMAIL PROTECTED]
> Subject: Re: Easyip & cable modem [7:19187]
>
>
> Now you need to setup a fat access-list or CBAC for some security from all
> the idiots on your cable subnet. You wouldn't believe the probes I get
> every day!! This will be a little challanging for you cus of your dynamic
> address. Of course, since your router will be up all the time, chances
are
> you will keep renewing the same IP. Let me know if you need some help on
> that. Better do it soon cus NAT won't protect you much, and you
definitely
> need protecting. I run IDS on my router and log all the probes and @!#$
> heads spoffing internal address and stuff. And believe me, that log gets
> pretty large especially when school is out !!
>
> Take care
> Tony
>
> ----- Original Message -----
> From: "Bob Lepine"
> To:
> Sent: Sunday, September 09, 2001 10:39 AM
> Subject: Easyip & cable modem [7:19187]
>
>
> > Woohoo. I got it working. I have my 2600 hooked up to my cable modem of
> > which I am a DHCP client. Thanks to the group for helping me figure this
> one
> > out! (Especially Tony Medieros and Leigh Anne Chisholm) I have now
hooked
> > the router up to my 2900 switch and have access to the net with all my
> > computer. This will greatly enhance my studies. I am listing the
> > configuration for those who need to do the same.
> > Names have been altered to protect the innocent!
> > Current configuration : 997 bytes
> > !
> > version 12.1
> > no service single-slot-reload-enable
> > service timestamps debug uptime
> > service timestamps log uptime
> > service password-encryption
> > !
> > hostname BobRouter
> > !
> > logging rate-limit console 10 except errors
> > enable password 7 045907031F23404B13
> > !
> > ip subnet-zero
> > !
> > !
> > no ip finger
> > ip host laptop 192.168.0.3
> > ip name-server 24.229.12.230
> > ip name-server 204.186.0.201
> > ip name-server 204.186.0.203
> > !
> > !
> > !
> > !
> > interface Ethernet0/0
> > ip address dhcp
> > ip nat outside
> > half-duplex
> > !
> > interface Serial0/0
> > no ip address
> > shutdown
> > !
> > interface BRI0/0
> > no ip address
> > shutdown
> > !
> > interface Ethernet0/1
> > ip address 192.168.0.6 255.255.255.0
> > ip nat inside
> > half-duplex
> > !
> > ip default-gateway 10.227.49.1
> > ip nat inside source list 10 interface Ethernet0/0 overload
> > ip classless
> > ip route 0.0.0.0 0.0.0.0 10.227.49.1
> > no ip http server
> > !
> > access-list 10 permit 192.168.0.0 0.0.255.255
> > no cdp run
> > !
> > line con 0
> > transport input none
> > line aux 0
> > line vty 0 4
> > password 7 05090A0A314E420C03
> > login
> > !
> > no scheduler allocate
> > end
> >
> > --
> > Bob Lepine
> > MCSE,MCDBA,CNA,CCNA,MCT
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19268&t=19187
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
