If you follow Chucks advice the posting listed below is a good guide on how
to split B channels
Re: ISDN B-channel splitting posted 03/23/2000
Rick Harville wrote:
>
> I have received several responses sofar expressing a great
> interest in the solution. Back to back ISDN over a single ISDN
> line seems to be a very acceptable approach to simulating DDR.
> Unfortunately, nobody seems to be able to confirm that it can
> be done. A seach of archives reveals discussions but no real
> verification that this is possible. The p If anyone has
> actually done this please respond as there seems to be a great
> interest in doing this.
>
> Once again, the question is, can you connect two BRI (st)
> interfaces through a NT1 device using only a single ISDN line?
>
> I have 2 Cisco 2503's with st Bri. Im using Motorola NT1 device
> with a
> single U interface and 2 ST ports. I have at my disposal a
> single ISDN line
> from SW Bell. I would like to split the spids at the nt1 device
> and practice
> my DDR with only one spid on each router.
>
>
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19436&t=19414
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
