Umm.. it's been a while since I played with access lists, but how about
access-list 101 permit ip 10.10.10.0 0.0.0.127 any
access-list 102 permit ip 10.10.10.128 0.0.0.127 any
JMcL
----- Forwarded by Jenny Mcleod/NSO/CSDA on 14/09/2001 03:38 pm -----
"Jins
Varghese" To:
[EMAIL PROTECTED]
Subject: Re: Policy Based
Routing...."ive had
Sent by: enough and i`m not going
[7:19808]
nobody@groups
tudy.com
14/09/2001
03:52
am
Please
respond
to
"Jins
Varghese"
Hi,
I think the problem is with your access list.
Try configuring like this,
access-list 101 permit ip 10.10.10.0 0.0.0.127 any
access-list 102 permit ip 10.10.10.0 0.0.0.255 any
Good Luck
Jins Varghese
wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Memo from Steve Skinner of PricewaterhouseCoopers
>
> -------------------- Start of message text --------------------
>
>
>
>
> chaps + chapes`ss
>
> i am having a slight problem with my Policy based routing config and
would
> be gratefull for your help..
>
> what i am trying to do is this (its quite simple ...it`s just so am i )
>
> all user`s are coming in on the 10.10.10.0 subnet (Eth0) ...
>
> i have two outbound int`s
>
> 11.11.11.11 (S0)
> 12.12.12.12.(bri0)
>
> what i want to do is split the 10.10.10.0 subnet and policy based route
> everything from 10.10.10.1-10.10.10.127 out S0,
> and route 10.10.10.128-10.10.10.256 out the bri0
>
> this doesn`t seem to be working .....here is my config ..
>
> thanks in advance steve (i have sent this to the right mailing list
haven`t
> I..?????)
>
> P.S i think it`s the wildcard mask that is stuffed....and i also have
EIGRP
> running on the router (old senario test)
>
> version 12.2
> service timestamps
> debug uptimeservice timestamps
> log uptime no
> service password-encryption
> !
> hostname Router
> !!
> memory-size iomem 25
> ip subnet-zero
> !
> ip audit notify log
> ip audit po max-events 100
> call rsvp-sync!!!!!!
> !
> !
> interface BRI0 no ip address
> ip address 12.12.12.12 255.255.255.0
> ip route-cache policy
> ip policy route-map POLICY
> no shutdown
> !
> interface FastEthernet0
> ip address 10.10.10.10 255.255.255.0
> ip route-cache policy (enables fast switching of policy routing...for
speed)
> ip policy route-map POLICY (create a policy called POLICY)
> !
> interface Serial0
> ip address 12.12.12.12 255.255.255.0
> ip route-cache policy (enable fast switching of policy routing)
> (create a policy called POLICY)
> !
> ip classless
> ip route 0.0.0.0 0.0.0.0 12.12.12.20
> no ip http serverip
> pim bidir-enable
> !
> access-list 101 permit ip 10.10.10.0 0.0.0.128 any
> access-list 102 permit ip 10.10.10.0 0.0.0.127 any
>
> route-map POLICY permit 10
> match ip address 101
> set ip next-hop 11.11.11.20
> !
> route-map POLICY permit 20
> match ip address 102
> set ip next-hop 12.12.12.20
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> !
> no scheduler allocate
> end
>
>
>
> --------------------- End of message text --------------------
>
> The principal place of business of PricewaterhouseCoopers and its
associate
> partnerships is 1 Embankment Place, London WC2N 6NN where lists of the
> partners' names are available for inspection. All partners in the
associate
> partnerships are authorised to conduct business as agents of, and all
> contracts for services to clients are with, PricewaterhouseCoopers. The
UK
> firm of PricewaterhouseCoopers is authorised by the Institute of
Chartered
> Accountants in England and Wales to carry on investment business.
> PricewaterhouseCoopers is a member of the world-wide
> PricewaterhouseCoopers organisation.
> ----------------------------------------------------------------
> The information transmitted is intended only for the person or entity to
> which it is addressed and may contain confidential and/or privileged
> material. Any review, retransmission, dissemination or other use of, or
> taking of any action in reliance upon, this information by persons or
> entities other than the intended recipient is prohibited. If you
received
> this in error, please contact the sender and delete the material from any
> computer.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=19910&t=19910
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
