If I'm not mistaken- the CCIE proctors have no way of checking bridging
beyond a wink & nod @ the configs either.
Phil
----- Original Message -----
From: "Chuck Larrieu"
To:
Sent: Saturday, September 15, 2001 9:09 PM
Subject: RE: Bridging [7:20078]
> yes.
>
> how are you going to test that it's working?
>
> Chuck
>
> -----Original Message-----
> From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
> Lupi, Guy
> Sent: Saturday, September 15, 2001 5:49 PM
> To: [EMAIL PROTECTED]
> Subject: Bridging [7:20078]
>
>
> Can you configure bridging using only serial interfaces, no ethernet
> involved at all? I have a 2501 connected to a 2511, and a 2503 connected
to
> the same 2511, both via serial. I want to configure the 2 serial
interfaces
> on the 2511 to bridge between them, is that possible? There is no
practical
> reason for this, just setting it up in the lab and I am curious. Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20084&t=20078
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
