Hai Nick,
For the interface of the router you want to set as DCE add clockrate
56000(whatever) to the interface. Then that interface will be taken as DCE.
You can verify whether it has become DCE by issuing show controllers
command.
Bye
Syam
----- Original Message -----
From: "Nick Christofi"
To:
Sent: Saturday, September 22, 2001 12:09 AM
Subject: DCE/DTE serial null cable [7:20715]
> Hey everybody,
> Have 2 2524's running in my lab, with the 60 pin
> DTE/DTE cable connecting the 2 serial ports, no
> DSU/CSU. How do I config one as the DTE and one as
> the DCE, with IOS 11.1, running frame-relay
>
> is the command: frame-relay intf-type dce
> enough?
>
> I get a lot of interface resets/carrier transitions
> take a look:
>
> Encapsulation FRAME-RELAY, loopback not set, keepalive
> set (10 sec)
> LMI enq sent 0, LMI stat recvd 0, LMI upd recvd 0
> LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0,
> DCE LMI down
> LMI DLCI 1023 LMI type is CISCO frame relay DCE
> Broadcast queue 0/64, broadcasts sent/dropped 0/0,
> interface broadcasts 0
> Last input never, output never, output hang never
> Last clearing of "show interface" counters never
> Input queue: 0/75/0 (size/max/drops); Total output
> drops: 0
> Queueing strategy: weighted fair
> Output queue: 0/64/0 (size/threshold/drops)
> Conversations 0/1 (active/max active)
> Reserved Conversations 0/0 (allocated/max
> allocated)
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> 0 packets input, 0 bytes, 0 no buffer
> Received 0 broadcasts, 0 runts, 0 giants
> 0 input errors, 0 CRC, 0 frame, 0 overrun, 0
> ignored, 0 abort
> 2 packets output, 291 bytes, 0 underruns
> 0 output errors, 0 collisions, 42 interface
> resets
> 0 output buffer failures, 0 output buffers
> swapped out
> 86 carrier transitions
> DCD=up DSR=up DTR=up RTS=up CTS=up
> thanks
> Nick
>
>
>
> __________________________________________________
> Terrorist Attacks on U.S. - How can you help?
> Donate cash, emergency relief information
> http://dailynews.yahoo.com/fc/US/Emergency_Information/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=20763&t=20715
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
