Thanks for the response. It is Singtel and I'm not sure what they are using. See In-line comments. TD ""Paul Jin"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I believe in this case, your ATM SCR = FR CIR in the network, so if you set > it at 384PCR 384SCR on the router, then you are telling the router to push > the traffic and treat this PVC as a 384K pipe. > > At the same time, your FR side and the provider network sees traffic coming > in at 384, but it knows that the CIR is really 192K, so anything above that, > it marks DE. > I think that the an cell above the 192Kbps will be marked as non-compliance cells on the ingress ATMswitch. These cells will be subjected to be dropped by any switch along the way. On the egress switch where ATM-FR conversion occurs, the non-compliance cells will be mapped to DE on frame relay. So Any switch along the path can drops the frame/cell at will.
> I believe if the traffic is not being pushed too long at the increased rate, > there is a good chance it will carry most of your traffic, however if you > keep the traffic at this speed consistently high, beyond the SCR/CIR that > your network is expecting, eventually the PVC's buffer might/will eventually > get filled up in the network and might discard. > > So it might be a good idea to try to keep your SCR at the prescribed limit > that your provider is setting within its network. > > Out of curiosity, who is your provider and what type of equipment are they > using? > > Paul Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=24212&t=24190 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
