Hey guys I need help on understanding DLSW. I can not use the keyword promiscuous any where in my config.
R3 and R2 is connected to Ring 100. R5 is connected to R3 and R2 via serial link. Task: 1. establish DLSW peer from R5 and R3 and R2 2. R5 should choose R2 as a better path to reach Ring 100 3. If R2 is unavailable then R3 should be backup for R5 4. R3 and R2 should establish peer only when there is a DLSW data to sent 5. Configure R3 such a way so that if any router is added to the network will establish a peer with R3 to reach Ring 100 Any tips or suggestion on how to configure these? Faisal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25179&t=25179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
