Hi Joe I don't know how this is done but will try to use the prom-peer-default command and see what happens.
Faisal ""Joe"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Just wondering how to do point number 5 without using the keyword > promiscuous? Do I use dlsw prom-peer-defaults? > ""news"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hey guys > > > > I need help on understanding DLSW. > > I can not use the keyword promiscuous any where in my config. > > > > R3 and R2 is connected to Ring 100. R5 is connected to R3 and R2 via > serial > > link. > > > > Task: > > 1. establish DLSW peer from R5 and R3 and R2 > > 2. R5 should choose R2 as a better path to reach Ring 100 > > 3. If R2 is unavailable then R3 should be backup for R5 > > 4. R3 and R2 should establish peer only when there is a DLSW data to sent > > 5. Configure R3 such a way so that if any router is added to the network > > will establish a peer with R3 to reach Ring 100 > > > > Any tips or suggestion on how to configure these? > > > > Faisal Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=25192&t=25179 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
