khramov wrote: > > Do both RSMs need to be on the same subnet? Yes. For instance, let's say VLAN 1 was the 10.1.1.0/24 subnet.
You could configure RSM#1 to have an address in VLAN1 of 10.1.1.2/24. Then configure RSM#2 to have an address in VLAN1 of 10.1.1.3/24. Then configure HSRP on both RSMs and use 10.1.1.1 as the standby IP. Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=29124&t=28982 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
