Are you trying to create a point-to-point frame relay subinterface? If so make sure you have the "encapsulation frame-relay" command under the major physical interface. ----- Original Message ----- From: "Mohammed Nabelsi" To: Sent: Monday, December 24, 2001 11:52 PM Subject: Re: Subinterface P-2-P [7:30070]
> Can you do a "sh ru" and post it! > Thanks > ----- Original Message ----- > From: "Ash Aslam" > To: > Sent: Monday, December 24, 2001 10:24 PM > Subject: Subinterface P-2-P [7:30070] > > > > Hello group, > > > > I am trying to set-up a point-to-point subinterface but I do not see the > > point-to-point or multipoint options under the physical interface as > > follows: > > > > r5-s(config)#interface serial 0.1 ? > > > > > > I am having problems creating the point-to-point subinterface on both the > > 2500 and 2600 router platforms. 2503 has IOS Version 12.1(5) and 2612 has > > IOS Version 12.1(4). I am not sure if this is IOS bug related. > > > > I have tried various things but to no avail. Can anyone shed some light > > with a brief example? > > > > Thanks in adv, > > Ash Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=30076&t=30070 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
