what about ppp chap sent-username ?
-----Original Message-----
From: bergenpeak [mailto:[EMAIL PROTECTED]]
Sent: 07 January 2002 13:09
To: [EMAIL PROTECTED]
Subject: PPP link negotiation problem [7:31132]
I'm working through the different ways one can configure CHAP
authentication between two routers over a PPP serial link.
If I configure ppp encap and ppp chap authentication and both sides
of the link and use the global:
username password
for identification, the link comes up and IPCP is established. The
routers have hostnames defined to be "rtr-2505" and "rtr-2514".
When I try to use the "simpler" CHAP config, where one can encode
in the interface directly the same hostname and password, I see
the error:
PPP Serial0: Using alternative CHAP hostname something
PPP Serial0: CHAP Challenge id=14 received from something
PPP Serial0: ignoring challenge with local name
On both rtrs I have the following defined on the serial interface:
ppp encap
ppp authentication chap
ppp chap hostname something
ppp chap password else
there are no usernames defined globally.
Ideas?
Thanks
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31138&t=31132
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
