"sent-username" is not an option for me under ppp chap. My options at "ppp chap" are "hostname", "password", "wait", and "refuse".
Thanks "McCallum, Robert" wrote: > > what about ppp chap sent-username ? > > -----Original Message----- > From: bergenpeak [mailto:[EMAIL PROTECTED]] > Sent: 07 January 2002 13:09 > To: [EMAIL PROTECTED] > Subject: PPP link negotiation problem [7:31132] > > I'm working through the different ways one can configure CHAP > authentication between two routers over a PPP serial link. > > If I configure ppp encap and ppp chap authentication and both sides > of the link and use the global: > > username password > > for identification, the link comes up and IPCP is established. The > routers have hostnames defined to be "rtr-2505" and "rtr-2514". > > When I try to use the "simpler" CHAP config, where one can encode > in the interface directly the same hostname and password, I see > the error: > > PPP Serial0: Using alternative CHAP hostname something > PPP Serial0: CHAP Challenge id=14 received from something > PPP Serial0: ignoring challenge with local name > > On both rtrs I have the following defined on the serial interface: > ppp encap > ppp authentication chap > ppp chap hostname something > ppp chap password else > > there are no usernames defined globally. > > Ideas? > > Thanks Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31267&t=31132 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
