Try using tftpdnld command from ROMMON.... Ziyaad
----- Original Message ----- From: "Jeff" To: Sent: Tuesday, January 08, 2002 3:53 AM Subject: RE: How to Get Router IOS Back [7:31168] > Not necessarily. > I believe that if you break yourself into rmmon, you can still use your > ethernet port reguardless of IOS. > Make sure the switch port is on portfast. > > I don't recall the exact proceedure to do it, but if theres a call for it, > I'll go find a router and break the network > > -Jeff > > > > On Mon, 7 Jan 2002, s vermill wrote: > > > Since your ethernet port is down, tftp distater recovery is out. The > xmodem > > option is fine, but I would recommend setting the console speed to 115200 > or > > you will be there a while. If that isn't possible, you may as well get > > started. I have done this in the past and always used 'xmodem -y > > filename.' Then from Hyperterminal, do a > > > > transfer > > > > send file > > > > protocol > > > > ymodem > > > > I think it will take a couple of hours at 9600. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=31252&t=31168 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
