Hello,
I have 3 routers configured with eigrp and ospf connected to a simulated
frame relay network through a 4th router.
All 3 routers are part of the same subnet, 7.7.7.1, .2, .3. a multipoint
circuit.
The middle router RTB (acting as the Central router) discovers networks from
RTA and RTC via Eigrp but the multipoint circuit itself is discovered via
ospf.Why is this so?
Why isn't EIGRP the only protocol that shows up in the central router's
routing table?
I even went and explicitly stated the AD for ospf as 111 but still no luck.
Can anyone advise?
Thank you.
Here is the routing table for RTB, the Central router:
Gateway of last resort is not set
D 192.168.10.0/24 [90/2185984] via 7.7.7.2, 00:13:59, Serial0.3
7.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
O 7.7.7.3/32 [110/64] via 7.7.7.3, 00:05:26, Serial0.3
O 7.7.7.2/32 [110/64] via 7.7.7.2, 00:05:26, Serial0.3
C 7.7.7.0/24 is directly connected, Serial0.3
9.0.0.0/32 is subnetted, 1 subnets
C 9.9.9.9 is directly connected, Loopback9
15.0.0.0/32 is subnetted, 1 subnets
D 15.15.15.1 [90/2297856] via 7.7.7.3, 00:14:00, Serial0.3
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=31597&t=31597
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
