You don't have an EIGRP problem, the routing protocol has nothing to do with an interface being up or down. 12.0.8 is pretttty old, before beating your head I would upgrade the IOS.
Dave Vajira Wijesinghe wrote: > > I have a 2610 router having IP IOS software (12.0.8). > This is connected to two different sites with 64kbps links. > eg > interface serial 0/0 > ip address 192.168.1.1 255.255.255.252 > > interface serial 0/1 > ip address 192.168.1.5 255.255.255.252 > > router is running with routing protocol EIGRP > > router eigrp 100 > network 192.168.1.0 > > Problem: > > I'm able to work with only ONE serial link at a time. > ie. > If one serial link is active, other one becomes "line protocol down" > If I remove the cable of the UP interface, the OTHER interface become UP > > I suspect this is due to the operation of EIGRP > Because I cannot configure subnet mask for the network defined under > eigrp 100 > This particular IOS doesn't allow me to do this and DRAM and FLASH > limitation prevents me from upgrading the IOS. > > Can any one tell me how to overcome the situation? > > Thanks, > Vajira > > 12.0.8 ip > ----------------------------------------- (on postoffice) > > The information contained in this email is confidential and is meant to be > read only by the person to whom it is addressed.Please visit > http://www.millenniumit.com/legal/email.htm to read the entire > confidentiality clause. > > --------------------------------------------------------- -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33699&t=33636 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
