personally, I would call the telco and whine and complain and rant and rave at them. It may not be their problem ( based on the problem description ) but it's a great stress reliever.
It is also possible that there is a hardware problem. perhaps a TAC case should be opened? Also, it is possible that the IOS image is corrupt. One can still download similar images from CCO, provided one has a contract. I agree- EIGRP would be the last place I would look as a cause. Chuck ""MADMAN"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > You don't have an EIGRP problem, the routing protocol has nothing to > do with an interface being up or down. 12.0.8 is pretttty old, before > beating your head I would upgrade the IOS. > > Dave > > Vajira Wijesinghe wrote: > > > > I have a 2610 router having IP IOS software (12.0.8). > > This is connected to two different sites with 64kbps links. > > eg > > interface serial 0/0 > > ip address 192.168.1.1 255.255.255.252 > > > > interface serial 0/1 > > ip address 192.168.1.5 255.255.255.252 > > > > router is running with routing protocol EIGRP > > > > router eigrp 100 > > network 192.168.1.0 > > > > Problem: > > > > I'm able to work with only ONE serial link at a time. > > ie. > > If one serial link is active, other one becomes "line protocol down" > > If I remove the cable of the UP interface, the OTHER interface become UP > > > > I suspect this is due to the operation of EIGRP > > Because I cannot configure subnet mask for the network defined under > > eigrp 100 > > This particular IOS doesn't allow me to do this and DRAM and FLASH > > limitation prevents me from upgrading the IOS. > > > > Can any one tell me how to overcome the situation? > > > > Thanks, > > Vajira > > > > 12.0.8 ip > > ----------------------------------------- (on postoffice) > > > > The information contained in this email is confidential and is meant to be > > read only by the person to whom it is addressed.Please visit > > http://www.millenniumit.com/legal/email.htm to read the entire > > confidentiality clause. > > > > --------------------------------------------------------- > -- > David Madland > Sr. Network Engineer > CCIE# 2016 > Qwest Communications Int. Inc. > [EMAIL PROTECTED] > 612-664-3367 > > "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=33740&t=33636 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
