To what are you conecting the multivlan port? Since a trunk is by definition multiple VLANs can you set up all the ports as trunks?
Dave Alfredo Pulido wrote: > > Hello , > I have a problem, I have 3 Catalyst 3524XL EN, but I need enable Trunk > Port and Multi-Vlan in various Interfaces. I had read in Cisco Documentation > that is not possible "You cannot configure a multi-VLAN port when a trunk is > configured on the switch." referents " Chapter 5 Creating and Maintaining > VLANs". > My questions is, How could I to solve this problem? I will need install > a GigaStack module or something 1000Base-X GBIC module for eliminate trunk > port. > > Sincerely > > -- > -- > Alfredo Pulido [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > Juan XXIII 44 // E-35004 Las Palmas de Gran Canaria, > Las Palmas // SPAIN > Tel: +34 828 111 000 Fax: +34 828 111 112 > http://www.idecnet.com/ > -- -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35869&t=35859 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
