Alfredo, There is one important difference. A multi vlan port strips the tags from the frames it passess for each vlan and a trunk port leaves the VLAN tags intact. So it really depends on what you are attempting to accomplish here. Can you be more specific?
Christopher Supino CCNP, CCDP, MCSE, CNA5, ASE Senior Network Design Engineer -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of MADMAN Sent: Tuesday, February 19, 2002 11:49 AM To: [EMAIL PROTECTED] Subject: Re: Trunk Port and multi-VLAN port [7:35859] To what are you conecting the multivlan port? Since a trunk is by definition multiple VLANs can you set up all the ports as trunks? Dave Alfredo Pulido wrote: > > Hello , > I have a problem, I have 3 Catalyst 3524XL EN, but I need enable > Trunk Port and Multi-Vlan in various Interfaces. I had read in Cisco Documentation > that is not possible "You cannot configure a multi-VLAN port when a > trunk is > configured on the switch." referents " Chapter 5 Creating and > Maintaining VLANs". > My questions is, How could I to solve this problem? I will need install > a GigaStack module or something 1000Base-X GBIC module for eliminate > trunk port. > > Sincerely > > -- > -- > Alfredo Pulido [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > Juan XXIII 44 // E-35004 Las Palmas de Gran Canaria, > Las Palmas // SPAIN > Tel: +34 828 111 000 Fax: +34 828 111 112 > http://www.idecnet.com/ > -- -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" [GroupStudy.com removed an attachment of type text/x-vcard which had a name of Christopher Supino ([EMAIL PROTECTED]).vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=35917&t=35859 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
