Hi
I want to purchase a Catlyst 2926T (sho ver output of the switch listed
below) switch for my CCNP lab but am not sure if the switch will run
software ver 4.5(12) or above. Listed below is the output from the sho
ver command of the switch in question. Will I have any issues loading
the latest software? I looked around on Cisco's web site but could not
find what I was looking for.
Console> (enable) sho ver
WS-C2926 Software, Version McpSW: 3.2(4) NmpSW: 3.2(4)
Copyright (c) 1995-1998 by Cisco Systems
NMP S/W compiled on Dec 10 1998, 18:26:04
MCP S/W compiled on Dec 10 1998, 18:28:46
System Bootstrap Version: 2.4(1)
Hardware Version: 2.1 Model: WS-C2926 Serial #: 007401756
Module Ports Model Serial # Hw Fw Fw1 Sw
------ ----- ---------- --------- ------ ------- -------
--------------------
1 2 WS-X2926T 007401756 2.1 2.4(1) 2.4(1) 3.2(4)
2 24 WS-X2926L 006788156 1.1 2.4(1) 3.2(4)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 16384K 8993K 7391K 8192K 4096K 4096K 256K 100K 156K
Uptime is 0 day, 0 hour, 0 minute
Thanks
Colin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36335&t=36335
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
