I would guess that you would be fine. Below is the output from the 2926T in
our developement rack.
Console> (enable) sh ver
WS-C2926 Software, Version McpSW: 4.5(10) NmpSW: 4.5(10)
Copyright (c) 1995-2000 by Cisco Systems
NMP S/W compiled on Dec 4 2000, 15:45:16
MCP S/W compiled on Dec 04 2000, 15:49:12
System Bootstrap Version: 2.4(1)
Hardware Version: 2.1 Model: WS-C2926 Serial #: 006778391
Mod Port Model Serial # Versions
--- ---- ---------- --------- ----------------------------------------
1 2 WS-X2926T 006778391 Hw : 2.1
Fw : 2.4(1)
Fw1: 2.4(1)
Sw : 4.5(10)
2 24 WS-X2926L 006828282 Hw : 1.1
Fw : 2.4(1)
Sw : 4.5(10)
DRAM FLASH NVRAM
Module Total Used Free Total Used Free Total Used Free
------ ------- ------- ------- ------- ------- ------- ----- ----- -----
1 16384K 9655K 6729K 8192K 3840K 4352K 256K 108K 148K
Uptime is 11 days, 2 hours, 4 minutes
Console> (enable) sh module
Mod Module-Name Ports Module-Type Model Serial-Num
Status
--- ------------------- ----- --------------------- --------- --------- ----
---
1 2 100BaseTX Supervisor WS-X2926T 006778391
faulty
2 24 10/100BaseTX Ethernet WS-X2926L 006828282 ok
Mod MAC-Address(es) Hw Fw Sw
--- -------------------------------------- ------ ---------- ---------------
--
1 00-10-2f-1a-4c-00 to 00-10-2f-1a-4f-ff 2.1 2.4(1) 4.5(10)
2 00-10-54-85-0a-78 to 00-10-54-85-0a-8f 1.1 2.4(1) 4.5(10)
Mod Sub-Type Sub-Model Sub-Serial Sub-Hw
--- -------- --------- ---------- ------
1 EARL 1+ WS-F5511 0006809542 1.0
Console> (enable)
Marc Russell
Network Learning, Inc.
1677 W. Hamlin
Rochester Hills, MI 48309
Ph# 248-299-8114
www.ccbootcamp.com (Cisco Training)
www.routerie.com (Cisco R&S CCIE Discussion groups)
www.securityie.com (Cisco Security CCIE Discussion groups)
www.optsys.net (Cisco hardware)
""Colin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi
>
> I want to purchase a Catlyst 2926T (sho ver output of the switch listed
> below) switch for my CCNP lab but am not sure if the switch will run
> software ver 4.5(12) or above. Listed below is the output from the sho
> ver command of the switch in question. Will I have any issues loading
> the latest software? I looked around on Cisco's web site but could not
> find what I was looking for.
>
> Console> (enable) sho ver
> WS-C2926 Software, Version McpSW: 3.2(4) NmpSW: 3.2(4)
> Copyright (c) 1995-1998 by Cisco Systems
> NMP S/W compiled on Dec 10 1998, 18:26:04
> MCP S/W compiled on Dec 10 1998, 18:28:46
>
> System Bootstrap Version: 2.4(1)
>
> Hardware Version: 2.1 Model: WS-C2926 Serial #: 007401756
>
> Module Ports Model Serial # Hw Fw Fw1 Sw
> ------ ----- ---------- --------- ------ ------- -------
> --------------------
> 1 2 WS-X2926T 007401756 2.1 2.4(1) 2.4(1) 3.2(4)
> 2 24 WS-X2926L 006788156 1.1 2.4(1) 3.2(4)
>
> DRAM FLASH NVRAM
> Module Total Used Free Total Used Free Total Used Free
> ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
> 1 16384K 8993K 7391K 8192K 4096K 4096K 256K 100K 156K
>
> Uptime is 0 day, 0 hour, 0 minute
>
> Thanks
>
> Colin
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=36336&t=36335
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
