Also consider that the blade may have failed and caused the reboot. Hope that it is covered under warranty or a Service Contract.
> -----Original Message----- > From: Fraasch James [mailto:[EMAIL PROTECTED]] > Sent: Thursday, March 07, 2002 9:56 AM > To: [EMAIL PROTECTED] > Subject: Cat 6505 Error Message [7:37543] > > > I swear I get more error messages on my stuff than anyone! I > must have that > magic 'static' toouch or something! > > So here is the problem: I have a 6506 hooked up with both > power supplies > plugged in and everything says 'green'- everything except > module 6 which is > a 16 port gigabit card. It was working and I was pinging all > downstream > switches as of Tuesday afternoon. I noticed in Show Version > that somehow > the switch was rebooted on Tuesday night (I think it lost > power and since it > is not quite production it is not yet plugged into a UPS). > Well, since the > reboot, module 6 has been unable to register. I get the error message: > SYS-5-MOD_NOREGISTRATION: No registration received from > module 6...resetting > module. > > Cisco website doesnt say much on the topic except that the > module will be > rebooted until it registers...but it never registers. So I guess the > questions I have are 1) Has anyone ever seen this before, and > 2) Could it be > related to power problems? > > Thanks for any help. > > James Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37561&t=37543 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
