I haven't seen the Sup III for Cat4K's yet but I do have a bit of experience with the L3 cards and am fairly unimpressed. After working with the 6500's (with MSFCs) configuring a Cat4K with L3 module certainly seems like a few steps backwards. My current client has a couple of Cat4K's with L3 modules that we'll be replacing this year with 6509's and MSFCs.
Last time I checked (perhaps this is different now) there were only three different versions of IOS available for the L3 module; to make matters worse, the code seemed to be written by the same group that writes 8540 code - based-on my personal experiences with the 8540 platform this didn't give me a high level of comfort. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Kekai Sent: Wednesday, March 06, 2002 8:23 PM To: [EMAIL PROTECTED] Subject: Cisco 4006 with Sup III [7:37504] Hello, Is anyone out there running Cisco 4006's with the new Sup III? If so what has been your experience with them? We are interested in using a pair of them as distribution switches with L3 capabilities to run OSPF. I know the 4000's had problems with this before so I was wondering if the new Sup III solved some of the old issues. Thanks in advance, Daniel _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37568&t=37504 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
