I've seen this happen if the image in flash gets corrupted. I'd try re-installing the IOS and see if that fixes it.
Will ""David A Goddard"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Gurus, > > an apology in advance for the basic question, but scouring the archives > didn't help as I couldn't seem to narrow down my search enough... here is my > problem ~ I have 3 routers that habitually boot to the rommon mode, not when > doing a reload (they boot fine then), but only when I first power them on. > When this occurs, all I do is type "I" and they boot straight up without > anymore problems. It's really annoying. > > I have the config registers set to 0x2102 and even put in the boot > statements to point to the correct file in flash, but this doesn't help. > FYI, the three routers are 2 MC3810's and a 7010. Occasionally a 2503 will > do the same thing, but not everyday like the other three. This is much like > when a PC's bios battery goes bad. > > Any light shed from my fellow scholars may alleviate a daily annoyance for > me, and would be greatly appreciated. > > thanks, > Dave Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37676&t=37669 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
