At some point since the last time you rebooted this router, you must have configured the same subinterface as multipoint. Either choose a different subinterface number or remove the subinterface and reboot the router. That will allow you to use the same number with a different link type.
HTH, John ---- On Mon, 11 Mar 2002, Richard Yun ([EMAIL PROTECTED]) wrote: > Hello, > > I'm trying to create a point-to-point subinterface under s0 inteface and > I'm > getting the following warning message: > > interface Serial0 > no ip address > encapsulation frame-relay > no ip route-cache > no ip mroute-cache > no fair-queue > clockrate 2000000 > r1(config)#int s0.1 point > % Warning: cannot change link type > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37834&t=37831 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
