Hi, Is there already a s0.1 interface defined?
Try creating a s0.2 or something that doesn't exist. Once you create a sub-interface you can't change it from multipoint to point-to-point and vice versa. Also, if you remove sub interfaces they aren't completely removed from memory until the router is reloaded/reset. Perhaps, you deleted the s0.1 interface and are running into this. HTH, Erick --- Richard Yun wrote: > Hello, > > I'm trying to create a point-to-point subinterface > under s0 inteface and I'm > getting the following warning message: > > interface Serial0 > no ip address > encapsulation frame-relay > no ip route-cache > no ip mroute-cache > no fair-queue > clockrate 2000000 > r1(config)#int s0.1 point > % Warning: cannot change link type > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __________________________________________________ Do You Yahoo!? Try FREE Yahoo! Mail - the world's greatest free email! http://mail.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37835&t=37831 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
