Hey all. Has anyone here gotten to use Multichassis PPP Multilink? All of the documentation I read keeps referring to dial-up and Access Servers, but one Cisco doc says:
"MMP is supported on the Cisco 7500, 4500, and 2500 series platforms and on synchronous serial, asynchronous serial, ISDN BRI, ISDN PRI, and dialer interfaces." Does this mean I can use this to bond multiple T1 between different routers? Here's the scenario. Let's say I have two 7500s at headquarters and a remote with with two 2500's, each with a single point-to-point T1 connection back to one of the HQ 7500s (2500A has a T1 back to 7500A, and 2500B has a T1 back to 7500B). Can I use Multichassis PPP Multilink to combine those two into a single bundle for load-balancing purposes? Any input would be appreciated since the Cisco docs aren't very clear as to what you can/can't do with this protocol. Thanks! Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37892&t=37892 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
