Multichassis Multilink is normally used for Dial applications. I've used it a bit with the Access Path products. In this case we used 2 7206's for the Master of the Stack, the AS5300's were just the ingress ports. Normally speaking this is done to bond two ISDN B Channels together from seperate PRI's on seperate routers. Works really well for this, but is still low bandwidth as compared to two T1's.
David C Prall [EMAIL PROTECTED] http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Michael Williams > Sent: Monday, March 11, 2002 3:24 PM > To: [EMAIL PROTECTED] > Subject: Multichassis PPP Multilink?!?!? [7:37892] > > > Hey all. Has anyone here gotten to use Multichassis PPP Multilink? > All of the documentation I read keeps referring to dial-up and Access > Servers, but one Cisco doc says: > > "MMP is supported on the Cisco 7500, 4500, and 2500 series > platforms and on > synchronous serial, asynchronous serial, ISDN BRI, ISDN PRI, and dialer > interfaces." > > Does this mean I can use this to bond multiple T1 between different > routers? Here's the scenario. Let's say I have two 7500s at headquarters > and a remote with with two 2500's, each with a single point-to-point T1 > connection back to one of the HQ 7500s (2500A has a T1 back to 7500A, and > 2500B has a T1 back to 7500B). Can I use Multichassis PPP Multilink to > combine those two into a single bundle for load-balancing purposes? > > Any input would be appreciated since the Cisco docs aren't very > clear as to > what you can/can't do with this protocol. > > Thanks! > Mike W. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37930&t=37892 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
