Use CBWFQ/LLQ Mario de Mello Bittencourt Neto wrote:
> Hi there, > > I have a setup where I think I 'd need to use CQ but the documents that > I found at cisco's site where not enough to understand / "master" the > subject. > > Here is my scenario : > > I have a cisco 1750 in my branch office and another one on a remote > site. Each cisco has two leased lines, one PPP and the other > Frame-relay, both operating with 64K. I use VoIP to make the phone > calls and I have database systems located at the remote site. > > I need to set up some sort of priority so I could optimize the > overall usage "reserving" bandwidth for more critical applications. > After searching I found that either policy routing or custom queue > should do the job (in one way or another), with CQ being the "correct" one. > > Can you help me out ? The examples that I found were too simple for > me to make any kind of decision. > > I am specially confused with the decision of setting a queue size. > > Best regards, > Mario Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37918&t=37918 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
