Hi all, I have a question regarding priority groups. We have 2 firewalls. 10.1.1.2 and 10.1.1.3. I am using 10.1.1.2 . But even if I am using 10.1.1.2 the connection is slow as before. What is wrong with my config? Any answer will be highly appreciated.
Best regards, Ciscobreaker, CCNP,CCDP Router#sh run Building configuration... Current configuration : 2121 bytes ! version 12.1 service timestamps debug uptime service timestamps log uptime service password-encryption service udp-small-servers ! hostname Router ! enable secret 5 $1$J0OT$To6EJUMsXnNQN6v.yGy9R1 enable password ak interface Ethernet0 ip address 10.1.1.1 255.255.255.0 ! interface Serial0 bandwidth 128000 ip address 192.168.1.2 255.255.255.0 priority-group 1 ! interface Serial1 no ip address ! no ip classless ip route 0.0.0.0 0.0.0.0 192.168.1.1 no ip http server ! no logging trap access-list 150 permit ip host 10.1.1.2 any priority-list 1 protocol ipx medium priority-list 1 protocol pad normal priority-list 1 protocol ip high list 150 priority-list 1 default low ! line con 0 line aux 0 line vty 0 4 password ak login ! end Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=38084&t=38084 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
