I never knew about this command. It is undocumented: http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc3/cref/cl icmds.htm
not there!!! I may try and play with it to see if it works. ""Bob Timmons"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > I imagine it may depend on the switch. On the 3500's (or I guess any switch > with IOS), you can specify the bandwidth command on any interface, but I've > never tried it and don't know how well it works. > > SWITCH1(config)#int fast 0/13 > SWITCH1(config-if)#bandwidth ? > Bandwidth in kilobits > > > > Greetings all, > > > > Is there a trick or a way to control utilization on a switch port? > > Assuming we want the user to use only 5 MB instead of 10. No special > > requirement at this time, just curious. > > > > Thanks..................Nabil Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39055&t=39038 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
