First, you should enable your http server on the PIX, and then you should allow your workstation IP address to access the http server. Lastly, you should check your Java VM. Latest PDM only works with Microsoft VM (at least on my case!)
Aurelian -----Original Message----- From: Timo Graser [mailto:[EMAIL PROTECTED]] Sent: Monday, March 25, 2002 2:34 PM To: [EMAIL PROTECTED] Subject: Can't access PIX506 with Browser [7:39449] I did a upgrade on my Pix506 from 5.2x to 6.1.2 after that I installed the pdm. I did a setup with the Ip address of my station. When I am connection to https://mystation I get first a signature window. I accept this with yes, then a login Window pops up I enter nothing and press return. Now I get from my browser page not found. I configured a enable password and tried to login with it-->the same result. I am using IE 6.0. if I do a show ver I see Des is enabled, but I don't see anything about pdm. Could somebody please help me? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39455&t=39449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
