Sorry for that posting, I found the failure. I just wanted to install the pdm with copy tftp flash now with copy tftp fash:pdm everything works great.
Timo Graser wrote: >I did configure that all. And I am using IE 6.0 so it is MS VM. > > >Georgescu, Aurelian wrote: > >>First, you should enable your http server on the PIX, and then you should >>allow your workstation IP address to access the http server. Lastly, you >>should check your Java VM. Latest PDM only works with Microsoft VM (at least >>on my case!) >> >>Aurelian >> >> >>-----Original Message----- >>From: Timo Graser [mailto:[EMAIL PROTECTED]] >>Sent: Monday, March 25, 2002 2:34 PM >>To: [EMAIL PROTECTED] >>Subject: Can't access PIX506 with Browser [7:39449] >> >>I did a upgrade on my Pix506 from 5.2x to 6.1.2 after that I installed >>the pdm. >>I did a setup with the Ip address of my station. >>When I am connection to https://mystation I get first a signature >>window. I accept this with yes, then a login Window pops up I enter >>nothing and press return. >>Now I get from my browser page not found. >>I configured a enable password and tried to login with it-->the same result. >> >>I am using IE 6.0. >>if I do a show ver I see Des is enabled, but I don't see anything about pdm. >> >>Could somebody please help me? Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39480&t=39449 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
