I do it all the time, here is an example between a 7500 and MSFC (flexwan):
interface Serial4/1/0.16 point-to-point ip address 70.1.1.1 255.255.255.0 no ip directed-broadcast traffic-shape rate 24000 4000 4000 1000 frame-relay interface-dlci 16 class dog interface Serial7/0/0.16 point-to-point ip address 70.1.1.2 255.255.255.0 frame-relay interface-dlci 16 clock rate 2000000 ! You can do same with 2500, 2600, 3600... Dave "Lomker, Michael" wrote: > > > I think the question is as clear as can be. Can I do frame > > relay between a 2501 and a 2611 router. > > I've never seen it done with two routers; providing the URL in the first > message would have helped. > > > Here is an example on Cisco's site that only uses 2 routers: > > > > http://www.cisco.com/warp/public/125/frbacktoback_hybrid.html > > It works fine...I just tried it on a 2621 and a 2501. You'll just need a > serial interface for the 2621 and a serial loopback cable. -- David Madland Sr. Network Engineer CCIE# 2016 Qwest Communications Int. Inc. [EMAIL PROTECTED] 612-664-3367 "Emotion should reflect reason not guide it" Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39646&t=39617 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
