You can do Frame Relay with two back-to-back Cisco routers of any type. Well, there may be some exceptions, but certainly a 2501 and 2611 should work.
It's not very "real world" but it's cheaper than 3 routers. Priscilla At 11:32 AM 3/27/02, Lomker, Michael wrote: > > I think the question is as clear as can be. Can I do frame > > relay between a 2501 and a 2611 router. > >I've never seen it done with two routers; providing the URL in the first >message would have helped. > > > Here is an example on Cisco's site that only uses 2 routers: > > > > http://www.cisco.com/warp/public/125/frbacktoback_hybrid.html > >It works fine...I just tried it on a 2621 and a 2501. You'll just need a >serial interface for the 2621 and a serial loopback cable. ________________________ Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39660&t=39617 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
