I think I found it... I had some IP'ing wrong. I can see the routes now :^)
Gateway of last resort is not set R 192.168.1.0/24 [120/1] via 192.168.2.1, 00:00:07, Ethernet0 C 192.168.2.0/24 is directly connected, Ethernet0 R 192.168.3.0/24 -Joe- ""geek"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > ok, > > I have a 4700 with a fastE card that is connected to a 5505 switch (port > 16). > > |---2514 (vlan1) > 4700---switch|---2501 (vlan2) > |---2509 (vlan3) > > > Port 16 is set for trunking ISL: > > (snip) > Port Mode Encapsulation Status Native vlan > ------------------------------------------------------------- > 2/16 on isl trunking 3 > > > I have 3 subinterfaces setup on the FastE; fa0.1, fa0.2, fa0.3 > each subinterface is IP'ed for 3 different networks; > 192.168.1.0,192.168.2.0,192.168.3.0 (respectively): > > (snip) > FastEthernet0.1 is up, line protocol is up > Hardware is DEC21140, address is 0050.732e.da0a (bia 0050.732e.da0a) > Internet address is 192.168.1.250/24 > MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ISL Virtual LAN, Color 1. > ARP type: ARPA, ARP Timeout 04:00:00 > > > > I have 1 router pugged into each vlan on the switch: > > (snip) > Ethernet0 is up, line protocol is up > Hardware is Lance, address is 0010.7be8.72d1 (bia 0010.7be8.72d1) > Internet address is 192.168.3.1/24 > MTU 1500 bytes, BW 10000 Kbit, DLY 1000 usec, > reliability 255/255, txload 1/255, rxload 1/255 > Encapsulation ARPA, loopback not set > > > I have RIP running on all the routers: > > > (snip) > Routing Protocol is "rip" > Sending updates every 30 seconds, next due in 6 seconds > Invalid after 180 seconds, hold down 180, flushed after 240 > Outgoing update filter list for all interfaces is not set > Incoming update filter list for all interfaces is not set > Redistributing: rip > Default version control: send version 1, receive any version > Interface Send Recv Triggered RIP Key-chain > FastEthernet0.1 1 1 2 > FastEthernet0.2 1 1 2 > FastEthernet0.3 1 1 2 > Automatic network summarization is in effect > Maximum path: 4 > Routing for Networks: > 192.168.1.0 > 192.168.2.0 > 192.168.3.0 > Routing Information Sources: > Gateway Distance Last Update > Distance: (default is 120) > > > now the problem. I am not getting the rip updates on the other routers. when > I do a show ip route on the router connected to vlan 2 for instance: > > (snip) > Gateway of last resort is not set > > C 192.168.2.0/24 is directly connected, Ethernet0 > > all I see is the connected network. Nothing from RIP?!? > > What am I missing?? > > > Thanks, > > -Joe- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39998&t=39996 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
