I believe the 1000 series can do 12.1, but nothing beyond that. But still, I would say that even the 2500 is rapidly approaching its last legs. If you just need a lab for the (very) near future, then they're OK. But if you actually want something that will remain useful for awhile, you should already be thinking of (at least) 2600's. I know, I know, $$$. But, that's your trade-off.
""Kris Keen"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Id ditch the 1004s they wont run the IOS 12.1 I dnt think, Are they dram and > flash upgradeable? if they are, they could be used for IOS 12.1, if not Id > replace them with some 25xx with 16/16. > > As for a set based switch, I used a Cisco 2926T which is basically a 5002, > it has all the bits (VLAN, VTP, Trunking, FEC, CatOS and so on) so thats a > good start, Cat5000 are great... Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=40304&t=40270 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
